Fundamentals of Choosing UPS System
Do you have any idea of how protective the uninterruptible power supply systems can be? This guide will inform you of what you should know about UPS system. Basically a UPS is a battery backup power system that that is used to supply power to allow equipment to shut down properly. It help in keeping important data from getting lost due to hard shutdown. It is recommended to use UPS before connecting electronic devices to power, or else their lifespan will reduce. When a blackout occurs, the battery power system is used to provide power for a duration of time. The amount of power you supply to your battery will influence battery life.
In order for you properly shut down and prevent loss of data and progress when blackout occurs you need to use a battery power source. There are very many UPS that offer different levels of protection. There are very many categories of UPS system that provide protection based on your needs. The main categories are the Standby, Line-Interactive, and Double-Conversion. Most of the people know that blackout is the only power problem. This is the situation in which power goes off and stay out for some time or days. Apart from blackout there are other common power problem. Common cause of this problem is severe weather, utility power shortages, accidents, and power failure.
The following are some of the power problems that exist. An example is a surge that its intensity is caused by lightning. Due to the intensity of Surge, it can destroy electrics and damage circuit boards.Surge occurs in very high voltage that it destroys the electronica and other components. Brown is also a power problem that is affected by the drop of voltage. There are circumstances in which the electricity companies are forced to lower the amount of voltage to minimize the chances of blackout. Different type of UPS system are meant to solve specific power problem. A good UPS should be large enough to support much equipment plugged into it. The capacity of the UPS system is significant for the safety of your electronic devices.
Higher capacity means that the system can support several electronic. The capacity of the UPS is found by calculating the load. Load is the overall power of all the appliances. By making an equipment list and calculating the total amount of watts each equipment need to operate you will be able to get the load. Once you have determined the load, take the number of cords that you need for the UPS. The number of UPS should be numerous to cover the number of power cords. Once you have your UPS topology you should think of what to do to your battery power in case the power goes out.